Raynor Showcase

Raynor Showcase Garage Doors

Raynor ShowCase – More Than Good Looks

The Raynor ShowCase garage door is made from rugged, galvanized steel inside and out, Its two-sided steel design encases a core of thermally bonded, CFC-free, expanded polystyrene insulation. A full 2 thick, ShowCase features sandwich-style construction and provides thermal protection at a 10.25 R-value. Engineered to Last ShowCase has heavy-duty, hot-dipped, galvanized steel sections with an epoxy primer and baked-on polyester finish, which resists rust and impact denting. To assure durable, long-lasting performance, ShowCase offers standard features, including:

ShowCase inclues galvanized steel sections for your Garage Door
  1. Vinyl thermal break between interior and exterior skins
  2. Section joint seal to prevent weather infiltration
  3. Hot-dipped, galvanized steel track
  4. Steel wheel, ball bearing rollers
  5. Bottom weatherseal to keep weather out
  6. Adjustable track for a precise fit
ShowCase garage doors have six two inch thick sections.

2″ Thick Door Sections ShowCases 2 thick door sections are made from high-strength, impact-resistant steel.

  1. Baked-on finish
  2. Epoxy primer
  3. Galvanized layer
  4. High-strength steel
  5. Polystyrene insulation
  6. High-strength steel

Available Designs:

Ranch
Ranch
Colonial
Colonial
Carriage House
Carriage House
Flush
Flush
Flush Beadline
Flush Beadline

Colonial & Flush:

Heights: 4-9 to 5-1 in 1 increments, 5-3, 5-6, 5-7, 5-9, 6, 6-4 to 7 in 1 increments, 8 to 9 in 1 increments, 9-2, 9-3, 9-6 to 10 in 1 increments Widths: 4 to 18 in 1 increments

Carriage & Ranch:

Heights: 4-9 to 5-1 in 1 increments, 5-3, 6-4 to 7 in 1 increments, 8, 8-1, 8-2, 8-3, 8-5 to 8-9 in 1 increments, 9-10, 10 Widths*: 4 to 18 in 1 increments *Some select widths may not be available Wind Load Pressures in PSF: (All garage doors impact rated) Door Width Wind Load Rating 9′ +65/-75 10′ +56.4/-65.1 16′ +45/-52 18′ +43.5/-50